GC Columns

InertCap for Amines shows excellent inertness and separation performances in the analysis of amines from C2 to C10. Basic compounds can be perfectly eluted without any adsorption by the column. Unlike other manufacturers’ columns, InertCap for Amines can simultaneously analyze other polar compounds such as alcohols due to our state-of-art inner column deactivation treatment ...

InertCap Pesticides is specially designed for simultaneous analyses of pesticides with GC/MS. Heat decomposition of pesticides inside the column and influence by matrix can be eliminated.

Guard columns and retention gaps are used widely in gas chromatography. Both of them are short (1-10 m) piece of uncoated deactivated fused silica tubing which are placed in-line between the GC injection port and the analytical capillary column. InertCap ProGuard is a"guard column built-in"analytical capillary column without the connection for such purposes. For this ...

InertCap Pure-WAX is a high polarity column bonded with polyethylene glycol. Based on newly developed inner treatment technology, InertCap Pure-WAX achieves the highest inertness among the columns available on the market. InertCap Pure-WAX is an optimal column for analyses of acidic compounds and basic compounds that commercially available WAX columns are not able to analyze.

Transfer lines are widely used for connecting interface of GC chromatography and MS. InertCap T.L. is a"transfer line built-in"analytical capillary column without connectors. Transfer line prevents degradation of stationary phase and keeps it low bleed. Additionally, transfer line is inert to transfer samples with no adsorption. Therefore there is no need to worry about ...

InertCap WAX is a high polarity column bonded with polyethylene glycol. It is slightly more polar than InertCap Pure-WAX and suitable for analyses of highly polar samples like solvents.

InertCap WAX-HT is a strong polarity column bonded with polyethylene glycol. By increasing the heat resistance of the stationary phase, InertCap WAX-HT can be also used at the maximum temperature of 280 °C. It is optimal for the analyses of polar samples such as solvents and also for the analyses of high-boiling compounds.

In the case of pesticide analysis, about half time can be reduced by using Fast GC columns. Use your currently GC system for a large number of samples, normally it needs a numbers of GC, GC/MS instruments, however, Fast GC columns can minimize the cost of installing additional system. No specific procedure such like high pressure injection, it is easy for anyone to use.