Envío gratis a partir de $500 x
Spanish
No tienes artículos en tu carrito de compras.

Silica Based SPE (Non-Polar)

Filtros
por página
InertSep C2 es un sorbente a base de sílice modificado con grupos funcionales C2 (etilo) que se utilizan para una interacción no polar más débil que C8. InertSep C2 se utiliza para aislamientos que se retienen demasiado en C8. A medida que se logra el taponamiento terminal en este sorbente, la interacción de intercambio catiónico con grup...
Desde $66.00
InertSep C8 es un sorbente a base de sílice modificado con grupos de función C8 (octilo) que ofrece una interacción no polar más débil que C18. InertSep C8 se utiliza para aislamientos que se retienen demasiado en C18. Con un recubrimiento terminal de alto nivel, la interacción catiónica con los grupos silanol en el sustrato de sílice se ...
Desde $1.00
InertSep C18 ENV es una fase sólida C18 sintetizada para análisis de agua. Es útil para el tratamiento de muestras de tensioactivos aniónicos en agua. • Tamaño de partícula promedio: 60 µm • Carga de carbono: 16% • Tapado final: Tapado en el extremo inferior • Área de superficie: 450 m2 / g • Volumen de poro: 0,7 ml / g • Tamaño de poro: ...
Desde $168.00
InertSep C18-C es un sorbente a base de sílice modificado con grupos funcionales C18 (octadecilo) que se utilizan para interacciones no polares. Además de la interacción no polar de propósito general, se puede esperar una interacción secundaria entre los grupos silanol no enlazados en el sustrato de sílice y los aislados en este C18 trifu...
Desde $163.00
InertSep C18-B es un sorbente a base de sílice modificado con grupos funcionales C18 (octadecilo) que se utilizan para la interacción no polar. Además de la interacción, se puede esperar una interacción secundaria en este sorbente monofuncional de uso general. • Tamaño de partícula promedio: 45 µm • Carga de carbono: 14% • Tapado final: M...
Desde $220.00
InertSep C18 es un sorbente a base de sílice modificado con grupos funcionales C18 (octadecilo) que se utilizan para la interacción no polar. Con nuestra tecnología de terminación de alto nivel, la interacción catiónica con los grupos silanol en el gel se elimina virtualmente, lo que reduce la adsorción de compuestos básicos. Este sorbent...
Desde $151.00
InertSep CH es un sorbente a base de sílice modificado con grupos funcionales ciclohexilo que le da a este sorbente una polaridad moderada similar a InertSep C2. InertSep CH ofrece una selectividad única para la extracción de ciertos compuestos químicos, en comparación con C18, C8, C2 y PH. • Tamaño medio de partícula: 60 μm • Carga de ca...
Desde $237.00
InertSep PH es un sorbente a base de sílice modificado con grupos funcionales fenilo que tienen una interacción no polar similar a C8. El grupo funcional fenilo tiene una interacción de enlace π-π que permite que una molécula aislada que lleva un anillo de benceno, como los compuestos aromáticos, interactúe selectivamente con el grupo fun...
Desde $1.00
InertSep C18-C FF es una versión arreglada de InertSep C18-C para aplicaciones que necesitan un alto flujo tarde. Este sorbente también es bueno para muestras biológicas viscosas y muestras de gran volumen para acelerar el procedimiento. • Tamaño de partícula promedio: 120 µm • Carga de carbono: 16% • Tapado final: bajo • Área de superfic...
Desde $182.00
Desde $307.00
Desde $269.00
InertSep C18 FF es una versión arreglada de InertSep C18 para aplicaciones que necesitan un alto flujo tarde. Este sorbente también es bueno para muestras biológicas viscosas y muestras de gran volumen para acelerar el procedimiento. • Tamaño de partícula promedio: 120 µm • Carga de carbono: 19% • Tapado final: alto • Área de superficie: ...
Desde $163.00
InertSep C18-B FF es una versión arreglada de InertSep C18-B para aplicaciones que necesitan un alto flujo tarde. Este sorbente también es bueno para muestras biológicas viscosas y muestras de gran volumen para acelerar el procedimiento. • Tamaño de partícula promedio: 120 µm • Carga de carbono: 14% • Tapado final: Medio • Área de superfi...
Desde $220.00
Sku# 5010-61204
InertSep C18 ENV is a C18 solid phase synthesized for water analysis. It is useful for sample treatment of anion surfactants in water.
$168.00
Sku# 5010-66000
InertSep C18 is a silica-based sorbent modified with C18 (octadecyl) functional groups being utilized for non-polar interaction. With our high-level end-capping technology, cationic interaction with the silanol groups on the gel is virtually eliminated, which reduces adsorption of basic compounds. This sorbent is suitable for removing lip...
$617.00
Sku# 5010-66001
InertSep C18 is a silica-based sorbent modified with C18 (octadecyl) functional groups being utilized for non-polar interaction. With our high-level end-capping technology, cationic interaction with the silanol groups on the gel is virtually eliminated, which reduces adsorption of basic compounds. This sorbent is suitable for removing lip...
$680.00
Sku# 5010-66010
InertSep C18 FF is an arranged version of InertSep C18 for applications that need high flow late. This sorbent is also good at viscous biological sample and large volume sample to expedite the procedure.
$617.00
Sku# 5010-66011
InertSep C18 FF is an arranged version of InertSep C18 for applications that need high flow late. This sorbent is also good at viscous biological sample and large volume sample to expedite the procedure.
$680.00
Sku# 5010-66020
InertSep C18-B is a silica-based sorbent modified with C18 (octadecyl) functional groups being utilized for non-polar interaction. In addition to the interaction, secondary interaction can be expected on this mono functional, general purpose sorbent.
$703.00
Sku# 5010-66021
InertSep C18-B es un sorbente a base de sílice modificado con grupos funcionales C18 (octadecilo) que se utilizan para la interacción no polar. Además de la interacción, se puede esperar una interacción secundaria en este sorbente monofuncional de uso general.
$753.00
Sku# 5010-66030
InertSep C18-C is a silica-based sorbent modified with C18 (octadecyl) functional groups being utilized for non-polar interaction. In addition to the general purpose non-polar interaction, secondary interaction between unbonded silanol groups on silica substrate and isolates can be expected on this trifunctional C18.
$609.00
Sku# 5010-66031
InertSep C18-C is a silica-based sorbent modified with C18 (octadecyl) functional groups being utilized for non-polar interaction. In addition to the general purpose non-polar interaction, secondary interaction between unbonded silanol groups on silica substrate and isolates can be expected on this trifunctional C18.
$676.00
Sku# 5010-66040
InertSep C18-C FF is an arranged version of InertSep C18-C for applications that need high flow late. This sorbent is also good at viscous biological sample and large volume sample to expedite the procedure.
$613.00
Sku# 5010-66041
InertSep C18-C FF is an arranged version of InertSep C18-C for applications that need high flow late. This sorbent is also good at viscous biological sample and large volume sample to expedite the procedure.
$676.00
Sku# 5010-66050
InertSep C8 is a silica-based sorbent modified with C8 (octyl) function groups that offers a weaker non-polar interaction than C18. InertSep C8 is used for isolates that are strongly retained too much on C18. With high-level end-capping, cationic interaction with the silanol groups on silica substrate is virtually eliminated and adsorptio...
$615.00
Sku# 5010-66051
InertSep C8 is a silica-based sorbent modified with C8 (octyl) function groups that offers a weaker non-polar interaction than C18. InertSep C8 is used for isolates that are strongly retained too much on C18. With high-level end-capping, cationic interaction with the silanol groups on silica substrate is virtually eliminated and adsorptio...
$678.00
Sku# 5010-66070
InertSep C2 is a silica-based sorbent modified with C2 (ethyl) functional groups being utilized for a weaker non-polar interaction than C8. InertSep C2 is used for isolates that are strongly retained too much on C8. As end-capping is accomplished on this sorbent, cation exchange interaction with none bonded silanol groups is virtually eli...
$609.00
Sku# 5010-66071
InertSep C2 is a silica-based sorbent modified with C2 (ethyl) functional groups being utilized for a weaker non-polar interaction than C8. InertSep C2 is used for isolates that are strongly retained too much on C8. As end-capping is accomplished on this sorbent, cation exchange interaction with none bonded silanol groups is virtually eli...
$667.00
Sku# 5010-66090
InertSep CH is a silica-based sorbent modified with cyclohexyl functional groups that gives this sorbent a similar moderate polarity with InertSep C2. InertSep CH offers a unique selectivity for the extraction of certain chemical compounds, compared with C18, C8, C2 and PH.
$703.00
Sku# 5010-66091
InertSep CH is a silica-based sorbent modified with cyclohexyl functional groups that gives this sorbent a similar moderate polarity with InertSep C2. InertSep CH offers a unique selectivity for the extraction of certain chemical compounds, compared with C18, C8, C2 and PH.
$753.00
Sku# 5010-65000
InertSep C18 is a silica-based sorbent modified with C18 (octadecyl) functional groups being utilized for non-polar interaction. With our high-level end-capping technology, cationic interaction with the silanol groups on the gel is virtually eliminated, which reduces adsorption of basic compounds. This sorbent is suitable for removing lip...
$317.00
Sku# 5010-65001
InertSep C18 is a silica-based sorbent modified with C18 (octadecyl) functional groups being utilized for non-polar interaction. With our high-level end-capping technology, cationic interaction with the silanol groups on the gel is virtually eliminated, which reduces adsorption of basic compounds. This sorbent is suitable for removing lip...
$375.00
Sku# 5010-65005
InertSep C18 is a silica-based sorbent modified with C18 (octadecyl) functional groups being utilized for non-polar interaction. With our high-level end-capping technology, cationic interaction with the silanol groups on the gel is virtually eliminated, which reduces adsorption of basic compounds. This sorbent is suitable for removing lip...
$249.00
Sku# 5010-65006
InertSep C18 is a silica-based sorbent modified with C18 (octadecyl) functional groups being utilized for non-polar interaction. With our high-level end-capping technology, cationic interaction with the silanol groups on the gel is virtually eliminated, which reduces adsorption of basic compounds. This sorbent is suitable for removing lip...
$319.00
Sku# 5010-65020
InertSep C18-B is a silica-based sorbent modified with C18 (octadecyl) functional groups being utilized for non-polar interaction. In addition to the interaction, secondary interaction can be expected on this mono functional, general purpose sorbent.
$386.00
Sku# 5010-65021
InertSep C18-B is a silica-based sorbent modified with C18 (octadecyl) functional groups being utilized for non-polar interaction. In addition to the interaction, secondary interaction can be expected on this mono functional, general purpose sorbent.
$579.00
Sku# 5010-65025
InertSep C18-B is a silica-based sorbent modified with C18 (octadecyl) functional groups being utilized for non-polar interaction. In addition to the interaction, secondary interaction can be expected on this mono functional, general purpose sorbent.
$300.00
Sku# 5010-65026
InertSep C18-B es un sorbente a base de sílice modificado con grupos funcionales C18 (octadecilo) que se utilizan para la interacción no polar. Además de la interacción, se puede esperar una interacción secundaria en este sorbente monofuncional de uso general.
$514.00
Sku# 5010-65040
InertSep C18-C is a silica-based sorbent modified with C18 (octadecyl) functional groups being utilized for non-polar interaction. In addition to the general purpose non-polar interaction, secondary interaction between unbonded silanol groups on silica substrate and isolates can be expected on this trifunctional C18.
$312.00
Sku# 5010-65041
InertSep C18-C is a silica-based sorbent modified with C18 (octadecyl) functional groups being utilized for non-polar interaction. In addition to the general purpose non-polar interaction, secondary interaction between unbonded silanol groups on silica substrate and isolates can be expected on this trifunctional C18.
$388.00
Sku# 5010-65045
InertSep C18-C is a silica-based sorbent modified with C18 (octadecyl) functional groups being utilized for non-polar interaction. In addition to the general purpose non-polar interaction, secondary interaction between unbonded silanol groups on silica substrate and isolates can be expected on this trifunctional C18.
$266.00
Sku# 5010-65046
InertSep C18-C is a silica-based sorbent modified with C18 (octadecyl) functional groups being utilized for non-polar interaction. In addition to the general purpose non-polar interaction, secondary interaction between unbonded silanol groups on silica substrate and isolates can be expected on this trifunctional C18.
$352.00
Sku# 5010-65080
InertSep C8 is a silica-based sorbent modified with C8 (octyl) function groups that offers a weaker non-polar interaction than C18. InertSep C8 is used for isolates that are strongly retained too much on C18. With high-level end-capping, cationic interaction with the silanol groups on silica substrate is virtually eliminated and adsorptio...
$281.00
Sku# 5010-65081
InertSep C8 is a silica-based sorbent modified with C8 (octyl) function groups that offers a weaker non-polar interaction than C18. InertSep C8 is used for isolates that are strongly retained too much on C18. With high-level end-capping, cationic interaction with the silanol groups on silica substrate is virtually eliminated and adsorptio...
$361.00
Sku# 5010-65120
InertSep C2 is a silica-based sorbent modified with C2 (ethyl) functional groups being utilized for a weaker non-polar interaction than C8. InertSep C2 is used for isolates that are strongly retained too much on C8. As end-capping is accomplished on this sorbent, cation exchange interaction with none bonded silanol groups is virtually eli...
$285.00
Sku# 5010-65121
InertSep C2 is a silica-based sorbent modified with C2 (ethyl) functional groups being utilized for a weaker non-polar interaction than C8. InertSep C2 is used for isolates that are strongly retained too much on C8. As end-capping is accomplished on this sorbent, cation exchange interaction with none bonded silanol groups is virtually eli...
$365.00
Sku# 5010-65160
InertSep CH is a silica-based sorbent modified with cyclohexyl functional groups that gives this sorbent a similar moderate polarity with InertSep C2. InertSep CH offers a unique selectivity for the extraction of certain chemical compounds, compared with C18, C8, C2 and PH.
$390.00
Sku# 5010-65161
InertSep CH is a silica-based sorbent modified with cyclohexyl functional groups that gives this sorbent a similar moderate polarity with InertSep C2. InertSep CH offers a unique selectivity for the extraction of certain chemical compounds, compared with C18, C8, C2 and PH.
$592.00
Sku# 5010-65200
InertSep C18 ENV is a C18 solid phase synthesized for water analysis. It is useful for sample treatment of anion surfactants in water.
$350.00
Sku# 5010-65201
InertSep C18 ENV is a C18 solid phase synthesized for water analysis. It is useful for sample treatment of anion surfactants in water.
$417.00
Refine
×