English
You have no items in your shopping cart.

Capillary GC Columns

Filters
per page
InertCap 5 is a low polarity GC column bonded with 5% diphenyl - 95% dimethylpolysiloxane. InertCap 5 is an optimal first choice column for a variety of general analyses such as pesticides and volatile compounds etc. Specifications • Fused silica • 5% diphenyl - 95% dimethylpolysiloxane • USP phase G27 • Low polarity • Cross-li...
From $490.00
InertCap 5MS is a low polarity GC column bonded with 5% diphenyl - 95% dimethylpolysiloxane. Designed as a column for GC/MS, InertCap 5MS achieves very high inertness and extremely low bleeding. Specifications • Fused silica • 5% diphenyl - 95% dimethylpolysiloxane • USP phase G27 • Low polarity • Cross-linked • Ultra-low ble...
From $590.00
InertCap 5MS/Sil is a low polarity GC column bonded with 5% diphenyl (equiv.) - 95% dimethylpolysilphenylene siloxane. Designed for GC/MS, InertCap 5MS/Sil achieves higher heat resistance and lower bleeding due to an arylene phase. In addition to our basic performance and quality inspection, each lot is inspected by using a pesticide mixt...
From $560.00
AQUATIC is a medium polarity column bonded with 25% diphenyl - 75% dimethylpolysiloxane specifically designed for the analyses of volatile organic compounds in water. As the column polarity is optimized, AQUATIC enables high separations. A column performance report with analysis of 33 compounds is attached to every column which guarantees...
From $980.00
AQUATIC-2 can be used up to 260 °C. Separation pattern is almost same as AQUATIC. Selectivity for a few types of compounds may be slightly different from InertCap AQUATIC. Specifications • Fused silica • 25% diphenyl - 75% dimethylpolysiloxane • USP phase G28 • Medium polarity • Cross-linked • Max Temperature: Up to iso. 260 °C...
From $610.00
InertCap 1 is a non-polar column bonded with 100% dimethylpolysiloxane. Compounds elute in order of increasing boiling point. InertCap 1 finds use in a wide range of general analyses. Specifications • Fused silica • 100% dimethylpolysiloxane • USP phase G2 • Non-polar • Cross-linked • Max Temperature: Up to iso. 325 °C - prog....
From $450.00
InertCap 1301 is a medium polarity column bonded with 6% cyanopropylphenyl and 94% dimethylpolysiloxane. Compared to InertCap 25, the polarity of InertCap 1301 is slightly lower. Cyano groups contained in the stationary phase offer unique selectivity. Specifications • Fused silica • 6% cyanopropylphenyl - 94% dimethylpolysiloxan...
From $380.00
InertCap 17 is a medium polar column bonded with 50% diphenyl - 50% dimethylpolysiloxane. It is stronger than InertCap 35, and it also shows high separation efficiency for general and pesticides analyses. Specifications • Fused silica • 50% diphenyl - 50% dimethylpolysiloxane • USP phase G3 • Medium polarity • Cross-linked • Ma...
From $370.00
InertCap 1701 is a medium polarity column bonded with 14% cyanopropylphenyl and 86% dimethylpolysiloxane. It contains cyano groups as InertCap 1301. InertCap 1701 has a stronger polarity than InertCap 25 and is suitable for pesticides screening analyses. Specifications • Fused silica • 14% cyanopropylphenyl - 86% dimethylpolysiloxa...
From $380.00
InertCap 1701MS is a medium polarity column bonded with 14% cyanopropylphenyl and 86% dimethylpolysiloxane, and designed for GC/MS. Containing cyano groups as InertCap 1301, InertCap 1701MS has a stronger polarity than InertCap 25 making it suitable for pesticides screening analyses. Specifications • Fused silica • 14% cyanopropylp...
From $560.00
Filters
Refine
;;