English
You have no items in your shopping cart.

SPE Manifolds

Filters
per page
SKU# 5010-50230
This standard vacuum manifold is recommended for starting solid-phase extraction. A 12 mm/16 mm Rack and waste liquid pump are provided as a set. InertSep Vacuum Manifold have an easy-to access structure to the next waste liquid funnel when performing solid phase extraction.
$1,580.00
SKU# 5010-50233
Nitric acid and sulfuric acid are used for inorganic compound analysis. This type of vacuum manifold system is made of stainless which have no concern of acid decay. This rack can set 50 mL DigiTUBEs up to 8 pcs.
$2,270.00
SKU# 5010-50234
This is a set containing a rack for 50 mL eggplant-shaped flasks 4pc (100mL eggplant-shaped flasks 2 pcs).
$1,390.00
SKU# 5010-50235
GL-SPE Manifold Kit 20 is a vacuum manifold system for treatment of 20 pcs SPE cartridges at the same time. Racks for 20 mL and 30 mL concentration tubes and a vacuum controller is standardly attached to this kit.
$1,900.00
SKU# 5010-50236
Flow controlled (approx. 1 mL/min) gravity flow elution speed enables to efficient elute of DNHP cartridges (up to 20 cartridges) after aldehyde capture. It is no need for pump to elute from cartridges, thus this system cut off manual troublesome elute procedure.
$1,440.00
SKU# 5010-50237
Part for InertSep Manifold
$690.00
SKU# 5010-50238
Part for InertSep Manifold Fit onto the glass chamber to perform solid phase extraction.
$650.00
SKU# 5010-50239
Part for InertSep Manifold
$60.00
SKU# 5010-50241
Part for InertSep Manifold
$370.00
SKU# 5010-50242
Part for InertSep Manifold
$370.00
SKU# 5010-50243
Vacuum Manifold parts for Inorganic Compounds Analysis
$690.00
SKU# 5010-50244
Vacuum Manifold parts for Inorganic Compounds Analysis
$780.00
SKU# 5010-50245
Vacuum Manifold parts for Inorganic Compounds Analysis
$250.00
SKU# 5010-50246
Vacuum Manifold parts for Inorganic Compounds Analysis
$380.00
SKU# 5010-50247
Vacuum Manifold (for eggplant-shaped flasks) Parts
$650.00
SKU# 5010-50248
Vacuum Manifold (for eggplant-shaped flasks) Parts
$60.00
SKU# 5010-50249
Vacuum Manifold (for eggplant-shaped flasks) Parts
$410.00
SKU# 5010-50251
Vacuum Manifold 20(for 20 samples) Parts
$570.00
SKU# 5010-50252
Vacuum Manifold 20(for 20 samples) Parts
$60.00
SKU# 5010-50253
Vacuum Manifold 20(for 20 samples) Parts
$360.00
SKU# 5010-50150
For cartridges Note: Vacuum controller not included. Please purchase separately.
$1,010.00
SKU# 5010-50155
For 96-well plates Note: Vacuum controller not included. Please purchase separately.
$750.00
SKU# 5010-33071
$560.00
SKU# 5010-50430
The GL-SPE Gravity Flow Manifold (for general analysis) is a manifold optimized for performing solid-phase extraction using the gravity flow method. It corresponds to the cleanup by multifunctional column and the aflatoxin separation and concentration method by immunoaffinity column in the total aflatoxin test method published on August 1...
$320.00
SKU# 5010-50431
Accessory for GL-SPE Gravity Flow Manifold (for general analysis)
$130.00
SKU# 5010-50432
Accessory for GL-SPE Gravity Flow Manifold (for general analysis)
$180.00
SKU# 5010-50433
Accessory for GL-SPE Gravity Flow Manifold (for general analysis)
$200.00
SKU# 5010-50434
Accessory for GL-SPE Gravity Flow Manifold (for general analysis)
$230.00
SKU# 5010-50440
SPE Gravity Flow Manifold (for inorganic compounds analysis) is an optimal manifold for performing solid phase extraction (SPE) targeted element analysis using gravity flow. Inorganic element analysis with SPE uses nitric acid and chloric acid. This is made of resin to avoid any acid corrosion.
$360.00
SKU# 5010-50441
Accessory for SPE Gravity Flow Manifold (for inorganic compounds analysis)
$130.00
SKU# 5010-50410
SPE Gravity Flow Rack can be used for the SPE procedure performed under gravity flow with InertSep K-solute. The sizes of collection vessels and stands can be selected by adjusting the height of the rack.
$730.00
SKU# 5010-50420
Accessory for GL-SPE Gravity Flow Rack and GL-SPE Gravity Flow Manifold (for general analysis)
$130.00
SKU# 5010-50421
Accessory for GL-SPE Gravity Flow Rack
$310.00
SKU# 5010-50422
Accessory for GL-SPE Gravity Flow Rack
$300.00
SKU# 5010-50423
Accessory for GL-SPE Gravity Flow Rack
$250.00
SKU# 5010-50424
Accessory for GL-SPE Gravity Flow Rack
$390.00
SKU# 5010-50425
Accessory for GL-SPE Gravity Flow Rack
$390.00
SKU# 5010-50400
Accessory for GL-SPE Gravity Flow Rack
$280.00
SKU# 5010-60010
The valve is connected to SPE cartridges or manifolds. And it’s valve is adjusted to control flow rate of the liquid that flow through it.
$310.00
SKU# 5010-50214
$130.00
SKU# 5010-52021
$60.00
SKU# 5010-52022
$160.00
SKU# 5010-52012
Luer Tip Male on both Sides (PP)
$50.00
SKU# 5010-52013
Luer Tip Female on both Sides (PP)
$50.00
SKU# 5010-52011
Luer Tip Female on both Sides (PTFE)
$60.00
SKU# 5010-50014
Part for InertSep Manifold Display the level of vacuum in the glass chamber.
$120.00
SKU# 5010-50015
Part for InertSep Manifold Used to adjust the amount of vacuum applied. Adjust while monitoring the pressure displayed on the vacuum gauge
$80.00
SKU# 5010-50032
Part for InertSep Manifold A luer type connection can be made, e.g. with a solid phase cartridge or filter disk. Also used to connect the delivery tips to the cover.
$120.00
;;