AQUATIC is a medium polarity column bonded with 25% diphenyl - 75% dimethylpolysiloxane specifically designed for the analyses of volatile organic compounds in water. As the column polarity is optimized, AQUATIC enables high separations. A column performance report with analysis of 33 compounds is attached to every column which guarantees...
From $1,210.00
AQUATIC-2 can be used up to 260 °C. Separation pattern is almost same as AQUATIC. Selectivity for a few types of compounds may be slightly different from InertCap AQUATIC.
From $773.00
InertCap 1301 is a medium polarity column bonded with 6% cyanopropylphenyl and 94% dimethylpolysiloxane. Compared to InertCap 25, the polarity of InertCap 1301 is slightly lower. Cyano groups contained in the stationary phase offer unique selectivity.
From $410.00
InertCap 17 is a medium polar column bonded with 50% diphenyl - 50% dimethylpolysiloxane. It is stronger than InertCap 35, and it also shows high separation efficiency for general and pesticides analyses.
From $410.00
InertCap 1701 is a medium polarity column bonded with 14% cyanopropylphenyl and 86% dimethylpolysiloxane. It contains cyano groups as InertCap 1301. InertCap 1701 has a stronger polarity than InertCap 25 and is suitable for pesticides screening analyses.
From $410.00
InertCap 1701MS is a medium polarity column bonded with 14% cyanopropylphenyl and 86% dimethylpolysiloxane, and designed for GC/MS. Containing cyano groups as InertCap 1301, InertCap 1701MS has a stronger polarity than InertCap 25 making it suitable for pesticides screening analyses.
From $510.00
InertCap 17MS is a medium polarity column bonded with 50% diphenyl - 50% dimethylpolysiloxane and designed for GC/MS. InertCap 17MS achieves one of the world's highest inertness and lowest bleed, and is suitable for microanalyses such as pesticides analyses.
From $500.00
InertCap 210 is a medium polarity column bonded with 50% trifluoropropyl and 50% methylpolysiloxane. It shows a unique selectivity for polar compounds, and due to the phosphorous nitrogen contained, InertCap 210 is suitable for the analysis of these kinds of compounds.
From $464.00
InertCap 225 is a medium polar column bonded with 50% cyanopropylmethyl and 50% phenylmethylpolysiloxane. The cyano group in the stationary phase includes a triple bond and retains compounds stronger according to the increase of the number of unsaturated bonds by their dipole/dipole interactions. For this reason, InertCap 225 shows high s...
From $710.00
InertCap 25 is a medium polarity column bonded with 25% diphenyl - 75% dimethylpolysiloxane. With different selectivities compared to other medium polarity columns, InertCap 25 is useful for identifying and quantifying different analytes.
From $428.00
InertCap 35 is a medium polarity column bonded with 35% diphenyl - 65% dimethylpolysiloxane. With a stronger polarity than InertCap 25, InertCap 35 also shows high separation efficiency for semi-volatile compounds and solvent analyses.
From $428.00
InertCap 5 is a low polarity GC column bonded with 5% diphenyl - 95% dimethylpolysiloxane. InertCap 5 is an optimal first choice column for a variety of general analyses such as pesticides and volatile compounds etc.
From $410.00
InertCap 5MS is a low polarity GC column bonded with 5% diphenyl - 95% dimethylpolysiloxane. Designed as a column for GC/MS, InertCap 5MS achieves very high inertness and extremely low bleeding.
From $473.00
InertCap 5MS/Sil is a low polarity GC column bonded with 5% diphenyl (equiv.) - 95% dimethylpolysilphenylene siloxane. Designed for GC/MS, InertCap 5MS/Sil achieves higher heat resistance and lower bleeding due to an arylene phase. In addition to our basic performance and quality inspection, each lot is inspected by using a pesticide mixt...
From $473.00
InertCap 624 is a medium polarity column bonded with 6% cyanopropylphenyl and 94% dimethylpolysiloxane and designed for VOC analysis.
From $655.00
InertCap 624MS is a medium polarity column bonded with 6% cyanopropylphenyl and 94% dimethylpolysiloxane. The structure is the same as InertCap 624, designed for low bleed, stable batch control and highest inertness.
From $710.00
InertCap CHIRAMIX has been designed to improve the separation of enantiomers coated with a mixture of cyclodextrin derivatives. Compared to the other commercially available columns which are coated with single cyclodextrin, InertCap CHIRAMIX can effectively separate a variety of enantiomers in a short time as the 1st choice column.
From $982.00
InertCap FFAP is a high polarity column bonded with nitroterephthalic acid modified polyethylene glycol. As the liquid phase shows acidity, it is possible to analyze free fatty acids without derivatization. InertCap FFAP is optimal for the analyses of acidic compounds.
From $428.00
InertCap for Amines shows excellent inertness and separation performances in the analysis of amines from C2 to C10. Basic compounds can be perfectly eluted without any adsorption by the column. Unlike other manufacturers’ columns, InertCap for Amines can simultaneously analyze other polar compounds such as alcohols due to our state-of-art...
From $537.00
InertCap Pesticides is specially designed for simultaneous analyses of pesticides with GC/MS. Heat decomposition of pesticides inside the column and influence by matrix can be eliminated.
From $910.00
Transfer lines are widely used for connecting interface of GC chromatography and MS. InertCap T.L. is a"transfer line built-in"analytical capillary column without connectors. Transfer line prevents degradation of stationary phase and keeps it low bleed. Additionally, transfer line is inert to transfer samples with no adsorption. Therefore...
From $746.00
InertCap WAX-HT is a strong polarity column bonded with polyethylene glycol. By increasing the heat resistance of the stationary phase, InertCap WAX-HT can be also used at the maximum temperature of 280 °C. It is optimal for the analyses of polar samples such as solvents and also for the analyses of high-boiling compounds.
From $464.00
InertCap WAX is a high polarity column bonded with polyethylene glycol. It is slightly more polar than InertCap Pure-WAX and suitable for analyses of highly polar samples like solvents.
From $419.00
In the case of pesticide analysis, about half time can be reduced by using Fast GC columns. Use your currently GC system for a large number of samples, normally it needs a numbers of GC, GC/MS instruments, however, Fast GC columns can minimize the cost of installing additional system. No specific procedure such like high pressure injectio...
From $573.00
